Antenna Bracket. Made with reinforced steel construction, which ensures high strength and rigidity, and a protective layer of black powder coat to resist scratches, chips, and corrosion.

Antenna Bracket - Louvered. Made with reinforced steel construction, which ensures high strength and rigidity, and a protective layer of black powder coat to resist scratches, chips, and corrosion.

Arrow Stick Brackets (pair). Made with reinforced steel construction, which ensures high strength and rigidity, and a protective layer of black powder coat to resist scratches, chips, and corrosion.

Our new Low Profile Drill Hardware Kit is available for select late model full-size trucks and is everything you need to install your Backrack Truck Rack.

Not compatible with Tonneau Cover Adapter Brackets.
Compatible with both 21" and 31" toolboxes.

Our new Low Profile Drill Hardware Kit is available for select late model full-size trucks. These require you to drill two holes through the top of the bed rail for installation. If you must have the Toolbox sitting at bed rail height this is the option. Four carriage head bolts secure the assembly allowing you to place the Toolbox at a low profile using existing clamps that came with the Toolbox. Drill if you must.

Our Standard Hardware Installation Kit is designed to be used on trucks that will not have a cross bed Toolbox behind the cab and is everything you need to install your Backrack Truck Rack.

Our Standard Hardware Kit is designed to be used on trucks that will not have a cross bed toolbox behind the cab. This system consists of a railmount bracket and rail plate that adds strength to the sheet metal bed rail of the truck. The rail plate provides a solid base on which to secure the cab guard assembly. Only this hardware kit is compatible with tonneau cover adapter brackets.

The Toolbox No Drill Installation Kit is designed to accommodate a standard 21" cross bed Toolbox and is everything you need to install your Backrack Truck Rack.

Our Toolbox No Drill Hardware Kit is designed to accommodate a standard 21" cross bed Toolbox. The Toolbox sits on top of the Toolbox Brackets allowing you to slide the Toolbox forward so that bed space is not wasted. The Toolbox is secured to the Toolbox Bracket by drilling sheet metal screws through the Toolbox and into the top of the Toolbox Bracket. Drill and bolt is also acceptable. Clamp hooks that come with the Toolbox are not required. Toolbox Brackets are also available in 31" length as an accessory. Not compatible with Tonneau Cover Adapter Brackets.

Made with reinforced steel construction, which ensures high strength and rigidity, and a protective layer of black powder coat to resist scratches, chips, and corrosion. Universal fitment for any rack. Drilling is required.

Safety Rack Universal Light Bracket. Made with reinforced steel construction, which ensures high strength and rigidity, and a protective layer of black powder coat to resist scratches, chips, and corrosion.

• 10-1/2" x 11-1/2" Base c/w 7/8" hole in center
• Fastens to horizontal tube on Safety Rack
• Fastens using sheet metal screws

Mining Whip Bracket attaches Mini/Buddy Whips. Made with reinforced steel construction, which ensures high strength and rigidity, and a protective layer of black powder coat to resist scratches, chips, and corrosion.

If you carry one or two ladders daily or, only have the need to carry long loads occasionally then Cab Guards from REALTRUCK BACKRACK® are an inexpensive alternative to traditional four post racks. The REALTRUCK BACKRACK® Rear Bar accessory simply drops into the rear Stake Pockets of your truck. The two inch tube runs across the rear of your truck bed with tie hooks at the same width apart as the upright posts on the REALTRUCK BACKRACK® Cab Guard. The Rear Bar allows for full opening and closing of the tailgate and can be removed in seconds for storage.

Tonneau Cover Adapters for Inside Rail Covers - 40XXX Series. Made with reinforced steel construction, which ensures high strength and rigidity, and a protective layer of black powder coat to resist scratches, chips, and corrosion.

Designed for covers that attach to the inside rail of the trucks bed rails. 40XXX Series Kits include everything required for installation except the BACKRACK™ Frame.

Unlike the previous 925XX Series, a separate Hardware Kit is not required for purchase. Example: Louvered Rack for 2016 Sierra would require - 40120 + 12500.

Landscape Tool Holder Attachment, fits 5 tools. Clamp on universal fit for all racks.

• Simple clamp design
• Holds 5 tools
• 1- large handle, 4- standard shaft
• Kit Includes 4-Clamps, fasteners and 2-horizontal tool holders

Landscape Tool Holder Attachment. Clamp on universal fit for all racks.

• Simple clamp design
• Holds 11 tools
• 3- large handle, 8- standard shaft
• Kit includes: 4-clamps, fasteners and 2-horizontal tool holders
• Compact racks may require drilling