SKU FBBR-05

The Spec Series Winch Front Bumper for the Ford Bronco is the perfect combination of style, performance and protection for your 6th Gen Bronco. It features a low profile design with an improved approach angle, making it ideal for serious rock crawling. The recessed winch mount accommodates many different sized winches, which when installed, sits in a low profile position partially within the bumper. The included heavy duty steel skid plate provides enhanced protection, and is a direct replacement to the stock skid.

A tubular bull bar provides light brush protection for the winch & grille, and also features a light mount for up to a 13-inch single row light bar. A 20-inch light bar can be mounted behind the satin black accent plate at the center of the bumper. Each wing can take (2) 3-inch light pods, giving you plenty of lighting options. Installation is a simple, bolt-on process.

The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our Relocation Bracket is sold separately, and available in the drop-down option to the right.

• High Clearance Design For Aggressive Rock Crawling
• Welded-in Zip Tie Tabs For Clean Wire Management
• Accepts Multiple Size Winches
• Included Bull Bar For Protection Against Light Debris/ Brush
• Micro-Texture Black Powder Coat
• Satin Black Mesh Accent Plate
• Bumper Mount Accepts (1): DV8 Elite 20", Rigid SR 20", or Baja Designs S8 20" Light Bar
• Bull Bar Accepts (1): DV8 Elite 13", Rigid SR 10", or Baja Designs S8 10" Light Bar
• Wings Accept (2): 3" Light Pods on Each Side

SKU FBBR-06

Our OE Plus Series 6th gen Bronco Front Bumper is designed to fit the body lines of your Bronco just like the factory bumper. Lighting options include a 20-inch single or dual row light bar and two 3-inch pod lights towards each end of the bumper. 1-inch think D-ring mounts that take 3/4-inch shackles provide recovery options. The OE Plus offers a low-profile design that improves the approach angle when adventuring off-road.

This Bronco Bumper is built out of high-grade steel and finished in a resilient micro-texture black powder coat finish that compliments the modern styling of your rig. The included paintable mesh accent panels add a stylish touch that stands out on the trail. Our bumper is compatible with the factory skid plate, front camera, and sensors. Sensor plugs are included for models not equipped with front factory sensors. The welded-in zip tie tabs allow for effective wire management, and the bumper is fully bolt-on with no cutting or drilling required.

There are 3 Possible Light Bar Configurations:

• Vehicles equipped with Adaptive Cruise can run a single row light bar behind the mesh pattern above the ACC Module.
• Vehicles without Adaptive Cruise can run a dual row light bar in the opening, placing it flush with the bumper.
• Vehicles equipped with Adaptive Cruise can run a dual row light bar if they relocate the ACC module with our ACC Relocation Bracket.

*Please Note: This bumper is not compatible with the factory fog lights.

• Low-Profile OE Style Design
• (1) 20" Single or Dual Row Light Bar Mount
• (4) 3-inch Pod Light Mounts
• (2) Integrated D-Ring Mounts
• Welded-In Zip Tie Tabs
• Paintable Accent Panels
• Compatible with OEM Skid Plate, Front Camera, and Sensors
• Retains ACC Functions
• Bolt-On Installation
• 3.5 & 5mm Plate Steel Construction
• Micro-Texture Black Powder Coat Finish

SKU FBBR-03

The OE Plus Series is a Low-Profile Front Bumper for the 2021-2024 Ford Bronco. This was designed to fit the form of the Bronco as tight as the OEM bumper. The front panel was designed to match the grille of the higher-tier trim levels, although it looks excellent with the lower-tier trim levels as well. Behind this cutaway pattern, a Dual Row 20-inch LED light bar can mounted. It features pod light mounts on each side of the bumper, that fit 2 pods each.

The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right.

** An Optional Steel Skid Plate is available for this bumper.

• 20" Dual Row Light Bar Mount
• (4) 3" Pod Light Mounts
• 3-Piece Design
• 2-Stage Micro-Texture Black Powder Coating
• 4mm body and 5mm mounts/supports
• Reinforced D-Ring Mounts
• Compatible with Factory Plastic and Metal Skid Plates
• Does not Interfere with 360º Camera
• Works with Factory Parking Sensors
• 3-Piece Construction

SKU FBBR-04

The DV8 Offroad Competition Series Bronco Front Bumper was CAD designed by an off-road desert racing driver and is the lowest profile bumper in our line. Its prerunner-style design offers superior protection extending from the front of the Bronco to the differential. The included steel skid plate serves as a direct replacement to the OEM plastic or metal skid, and features bolt-on side gussets for extra engine protection. The Comp Series provides an improved approach angle over the stock front bumper & skid.

This was constructed using 1.5mm & 3mm steel tubing with 3.5mm steel plates for maximum weight reduction without sacrificing protection. At the center of the bumper is a paintable aluminum mesh panel that provides improved airflow to the intercooler. There are inset light mounts for two 3-inch LED light pods and one 20-inch dual row LED light bar to provide supplemental lighting off-road. The bumper has mounting holes for the front parking sensors, and we provide plugs for models that lack the feature. Adaptive Cruise Control equipped Broncos require our ACC Relocation Bracket to retain functionality.

• Includes a Steel Skid Plate with Side Gussets
• Low-Profile Fitment with Improved Approach Angle
• Lightweight Design Providing Ample Protection
• Tube & Plate Steel Construction
• Micro-Texture Black Powder Coat Finish
• Mounts for (2) 3" LED Pod Lights
• Mount for 20" Dual Row LED Light Bar
• Integrated Front Parking Sensor Mounts
• Simple Bolt-On Installation

**Please Note: This bumper is not compatible with the factory plastic or steel skid plate. We've designed a special replacement steel skid plate with side gussets that is included with this bumper.

SKU FBBR-01

The DV8 Offroad MTO (Made to Overland) Series Bumper is a Winch-Ready Front Bumper for the 6th Gen Ford Bronco, and is compatible with all trim levels. Manufactured from high-grade steel, the MTO Series Bronco bumper retains the factory sensors, has a 3-inch pod light mount towards each side, and mesh inserts that can be painted. There is an optional bolt-on bull bar that can mount a 13-inch LED light bar to supplement your lighting.

The winch mounting point was designed to sit within the bumper, and is accessible through 2 openings at the top of the bumper. It can mount up to a 12,000 lb. winch. If you choose not to run a winch, we include light brackets to mount a single row 20-inch light bar behind the perforated aluminum accent plate.

The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right.

• Optional Bull Bar
• (2) 3" Pod Light Mounts
• 2-Stage Micro-Texture Powder Coating
• 4mm Body and 5mm Mounts/Supports
• In-Bumper Winch Mount
• Reinforced D-Ring Mounts
• Compatible with Factory Plastic and Metal Skid Plates
• Works with Factory Parking Sensors
• Paintable Aluminum Mesh Panels
• 3-Piece Construction

SKU FBBR-02

The Bronco FS-15 Series is a 2021-2023 Ford Bronco Winch-Ready Mid-Width Front Bumper, with the option to include modular wings to make it a full-width bumper. The light mount tabs on the bull bar can be oriented to mount a 13-inch light bar above or below the bull bar. Up to a 12,000 lb. winch can be mounted on top of the bumper. At the center of the bumper, either a 20-inch dual row light bar or 6 pod lights can be mounted.

Two recovery mounts that take 3/4" D-rings provide additional recovery options. This bumper is compatible with the OEM plastic & metal skid plates, and also retains the factory parking sensors.

The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right.

** An Optional Steel Skid Plate is available for this bumper.

• Optional Full-Width Wings (FBBR-02W)
• Adjustable Bull Bar Light Tabs
• 2-Stage Micro-Texture Black Powder Coating
• 3.5mm Body and 5mm Mounts/Supports
• Winch Ready
• Reinforced D-Ring Mounts
• Compatible with Factory Plastic and Metal Skid Plates
• Works with Factory Parking Sensors

SKU RBBR-05

Our Spec Series 6th Gen Bronco Rear Bumper is constructed with 3.5 to 5mm thick steel and finished with a micro-texture black powder coat to guard your vehicle from damages when adventuring off-road. Mount up to two 3-inch pod lights for increased rear lighting, and attach two 1-inch thick D-ring mounts for recovery options when stuck in the backwoods. Utilize the welded-in zip tie tabs for hiding and managing wires from after-market lights.

The sleek modern steel design and added satin black aluminum accent panels gives our bumper a seamless fit that complements your Bronco's styling. Our fully bolt-on design makes installation a breeze with no cutting or drilling required. The bumper is compatible with the OEM tire carrier up to a 37-inch spare. To retain full visibility of the third brake light with a 37-inch spare, purchase our Third Brake Light Extension Bracket. Our bumper allows you to retain full use of the factory hitch.

* Please Note: This is compatible with all trim levels of the 2021+ Bronco, including the Bronco Raptor.

• 6th Gen Ford Bronco Spec Series Rear Bumper
• Direct Fit that Enhances Factory Styling
• Compatible with Factory Hitch
• Features Welded-In Zip Tie Tabs for Clean Wire Management
• Fully Bolt-On Design That Doesn't Require Modification or Drilling
• Aluminum Backed Logo
• Mounts (2) 3" Light Pods
• Features (2) 1" Thick D-Ring Mounts that Accept a 7/8" Pin
• Up to a 37" Spare Tire Will Fit Above the Bumper on the OEM Carrier
• Compatible with All Trim Levels (Including Raptor)
• Micro-Texture Black Powder Coat
• Satin Black Accent Panel
• All Mounting Hardware is Included

SKU RBBR-04

DV8 Offroad's 6th Gen Bronco Competition Series Rear Bumper is a tough and stylish bumper that's perfect for your off-road rig. This low-profile bumper is constructed from steel tube and plate, and was inspired by desert racing. It features light mounts for 3-inch LED light pods, so you can light up the trail behind you in dark conditions. With its low-profile design, you can fit up to a 37-inch spare tire.

The OEM reverse sensors are integrated into the bumper via mounting holes, so you retain full functionality of the feature. If your model does not have parking sensors, we provide plugs to cover the holes. Additionally, it accommodates the factory hitch. Toward each end of the Competition Series are two paintable aluminum accent panels that help cut weight, and compliment the style of the bumper. Installation is a simple bolt-on process and an install guide can be found below.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• Low-Profile Desert Racing Design
• Tube & Plate Steel Construction
• Two Light Mounts that Fit 3" Light Pods
• Includes Tailgate Mounted License Plate Bracket
• Fits up to 37" Spare Tire
• Paintable Aluminum Accent Panels
• Retains Full Functionality of OEM Backup Sensors
• Accommodates Factory Tow Hitch
• Bolt-On Installation
• Minor Wiring Required During Install

SKU RBBR-01

This Bronco Rear Bumper is part of the MTO Series (Made to Overland), and is compatible with all Bronco trim levels. Manufactured from high grade steel, it was designed to protect the rear end while maintaining high ground clearance. We've placed the license plate mount at the side of the bumper, in order to accommodate the Sasquatch package 35-inch tires, and to ensure the tail gate swings open freely. The bumper can fit up to a 37-inch tire on the OEM carrier above. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension. Included with the new license plate bracket are license plate lights.

Two 3-inch flush mount pod lights can be mounted towards either side of the bumper. These can be wired to the reverse lights, or to a separate wiring harness in order to provide supplemental lighting at the rear of your Bronco while on the trail. There are 2 clevis mounts that take 3/4-inch D-ring shackles to provide recovery options. The MTO Series bumper includes sensor holes to retain full functionality of the factory backup sensors.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• (2) Mounts for 3" Flush Mount Pod Lights
• Reinforced D-Ring Mounts
• 2-Stage Micro-Texture Black Powder Coating
• Retains Factory Backup Sensors
• 4mm Body and 5mm Mounts/Supports
• Paintable Aluminum Mesh Panels
• Accommodates up to 37" Spare Tire on OEM carrier
• Compatible with Factory Tow Hitch

SKU RBBR-02

The FS-15 Series Bronco Rear Bumper was designed to maximize ground clearance when taking your Bronco off-road. It provides superior rear-end protection while closely following the factory body style and contours. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37-inch spare tire mounted on the OEM carrier will fit above the bumper. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension.

Two 3-inch flush mount pod lights can be installed towards either side of the bumper to provide supplemental trail lighting. Alternatively, they can be wired together and work in tandem with your reverse lights. Two reinforced clevis mounts that take 3/4-inch D-ring shackles provide recovery options during your off-road adventures.

Our high clearance Bronco bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• Higher Than Factory Ground Clearance
• 3.5mm Steel Plates with 5mm Steel Supports
• Micro Texture Black Powder Coat
• Accepts Two, 3" Flush Mount LED Pod Lights
• Dual Clevis Mounts for 3/4" D-Ring Shackles
• Retains Factory Backup Sensors
• Accommodates up to 37" Spare Tire
• Compatible with Factory Tow Hitch