SKU FBJL-05

We took our iconic FS-15 Jeep Front Bumper and introduced several improvements. We drastically reduced overall weight while maintaining the same standards in strength and protection. The overall fit and finish was improved, and JL/JT models no longer require a bumper adapter.

This stubby Jeep front bumper was designed for performance and protection while on the trail. Its high clearance design is suited for anything from easy to the most advanced OHV trails. The winch mount can fit multiple winch sizes, including most 12,000lb winches. Couple this with dual 1-inch thick D-ring mounts for 3/4-inch shackles, and you have ample options for just about any recovery situation. The heavy duty bull bar protects both the winch and grille from light debris such as brush or small branches. The FS-15 works great in conjunction with our SPJL-02 Sway Bar Disconnect Skid Plate to provide solid front end protection when crawling over rocky obstacles.

This bumper features mounting points for factory 4-bolt style 4-inch fog lights, enabling you to retain the OEM feature. The bull bar is capable of mounting either dual light pods or our 13-inch Elite Series Light Bar. Installation on JL/JT models is a strictly bolt-on process, but please note that JK models require trimming or removal of the plastic trim cover.

• Stubby Jeep Front Bumper
• Works Great with our Sway Bar Skid Plate
• Fits Multiple Size Winches and Most 12k lb Winches
• 1" Thick D-Ring Mounts that Accept 3/4" Shackles (?" Pin)
• Heavy Duty Bull Bar to Protect the Winch/Grille from Light Debris
• High Clearance Design for Ultimate Approach Angles
• An Updated Design of our Iconic DV8 FS-15
• (2) Factory 4-Bolt Style 4" Fog Lights
• (2) 3" Light Pods OR (1) 13" Elite Series Light Bar (Requires our Elite Series Large Light Bar Mounts)

SKU FBJL-11

Engineered for the Wrangler JK & JL, as well as the Gladiator JT, this stubby Jeep winch bumper boasts a combination of off-road functionality and striking aesthetics. It was designed to maintain optimal clearance, to enable you to navigate the most challenging terrains. Equipped with a recessed winch tray tucked behind a tubular bull bar, many different size winches can be mounted for recovery options. 1-inch thick D-ring mounts that take 3/4-inch shackle pins provide additional recovery options. Engineered to accommodate DV8 Elite 20" Dual Row, Baja Designs 20" Single Row, or Rigid 20" Single Row light bars, the inset light mount offers you lighting options on the trail. Your Jeep's OEM sensors are integrated in our bumper design, and retain their functionality. The bumper and protective bull bar are finished in a micro-texture black powder coat. The FS-1 Series bumper features a fully bolt-on installation. * Please Note: These bumpers not compatible with traditional roller style fairleads.

• High Clearance Stubby Winch Bumper
• Tubular Bull Bar
• Retains OEM Sensors
• Accepts Multiple Size Winches
• 20" Dual Row Light Bar Mount
• 1" Thick D-Ring Mounts for 3/4" Pin Shackles
• Recessed winch Tray and Removable Fairlead Mount
• Micro-Texture Black Powder Coat
• Bolt-On Installation
• The 20" light bar mount will only work with the following:
• Baja Designs 20"
• Rigid 20"
• DV8 Elite 20" Dual Row

SKU FBJL-12

Our MTO Series Wrangler & Gladiator Winch Front Bumper features a full-width design for maximum protection on the trail. Its aggressive design and flared wings look great with the JK factory fenders and the JL/JT Rubicon and Non-Rubicon fenders. The recessed winch tray accepts multiple size winches, and sits protected behind a tubular bull bar. Additional recovery options are provided by the 1-inch D-ring mounts that take 3/4-inch shackle pins. Sitting behind paintable aluminum accent panels is a mount that can take a DV8 Elite 20" single row light bar, Baja Designs S8 20", or Rigid SR 20" LED light bars. On each wing of the bumper is a mount for a 3-inch light pod. The bumper is finished in a micro-texture black powder coat, and features a fully bolt-on installation. The MTO Series front bumper is the perfect balance of durability, style, and utility.

Please Note: These bumpers not compatible with traditional roller style fairleads.

• Full Width Design for Maximum Protection
• Accepts Multiple Size Winches
• Paintable Aluminum Accent Panels
• Designed to Work Well with all JK/JL/JT Factory Fenders
• 20" Single Row Light Bar Options
• Mounts for (2) 3" Pod Lights
• 1" D-Ring Mounts for 3/4" Shackle Pins
• Micro-Texture Black Powder Coat
• Works Flawlessly with our SPJL-02 Skid Plate
• Fully Bolt-On Installation

SKU FBJL-07

Designed with rock crawling in mind, our Gladiator JT & Wrangler JK/JL Mid-Width Winch Front Bumper boasts a high clearance design. Engineered to perfection and inspired by the classic DV8 FS-7 bumper, this rugged bumper is designed to take your adventure to the next level. Bumper features a recessed winch tray, ensuring your winch stays at a lower profile position. Not only does it provide a sleek and streamlined appearance, but it also accommodates a wide range of winch sizes, making it versatile and adaptable to your needs.

A bull bar located in front of the winch adds an extra layer of protection to your vehicle, safeguarding it from potential obstacles and impacts. Equipped with D-ring mounts that accept 3/4" shackles, the FS-7 ensures you have reliable recovery options whenever the situation demands it.

At the center of the bumper is a light mount Compatible with the following lights:

• DV8 Elite Series 20" dual row
• Baja Designs 20" single row
• Rigid 20" single row

Additionally, each wing can take a 3-inch pod light to round out your supplemental lighting.

* Please Note: These bumpers not compatible with traditional roller style fairleads.

• Mid-Width Design
• High Clearance
• Bull Bar
• Great for Use with Aftermarket Fenders
• 20" Light Bar Mount
• Accepts Multiple Size Winches
• Recessed Winch Tray
• D-Ring Mounts for 3/4" Shackle Pins
• Micro-Texture Black Powder Coat

SKU FBJL-06

Our revamped FS-25 Stubby Jeep Front Bumper is now better than ever with enhanced features and a sleek design. We've listened to our customers and made significant improvements to make this bumper a top choice for Jeep Wrangler JK, Wrangler JL, and Gladiator JT owners. One of the standout upgrades is the improved micro-texture powder coating, providing superior durability and resistance to wear and tear. The bumper's reduced weight ensures optimal performance without compromising strength, making it an ideal choice for off-road driving.

Designed to fit seamlessly on the Wrangler JK/JL and Gladiator JT without the need for a bumper adapter, the FS-25 Stubby Jeep Front Bumper offers a hassle-free installation experience. No modifications required-simply bolt it on and hit the trails. The FS-25 comes equipped with a removable plated bull bar, allowing for versatile customization options. With its innovative design, you can effortlessly mount the DV8 Elite 20" Single Row Light Bar, the Rigid SR 20" Light Bar, or the Baja Designs S8 20" Light Bar, enhancing your visibility and adding a stylish touch to your Jeep.

Rock crawlers will appreciate the high clearance design of this bumper, ensuring maximum maneuverability on challenging terrain. Not only does it provide exceptional ground clearance, but it also offers a range of recovery options. The bumper is compatible with most winch sizes, and the winch plate is removable if you prefer not to run a winch, giving you the freedom to customize your setup. Additionally, the FS-25 Stubby Jeep Front Bumper features clevis mounts capable of accepting 3/4" D-ring Shackles, such as our Elite Series D-Rings, enabling you to tackle recovery tasks with confidence.

Included fog light mounts are suitable for OEM 4-bolt 4-inch fog lights, as well as our aftermarket fog lights. We've also taken care of wire management with the inclusion of zip tie tabs, allowing you to keep your wiring organized and secure. No more messy and tangled wires-enjoy a clean and professional-looking setup.

• Stubby High Clearance Jeep Bumper
• Plated Bolt-On Bull Bar
• Mount for Single Row 20" Light Bar
• Fog Light Mounts
• Winch Mount Compatible With Multiple Sizes
• D-Ring Mounts
• Direct Fit Bolt-On Installation

SKU FBJL-09

Transform your 2018 or newer Jeep Wrangler JL or Gladiator JT into a rugged and unstoppable off-road machine with the new Spec Series Winch Front Bumper from DV8 Offroad. Built for performance, protection, and one-of-a-kind style, this bumper offers a bold look that can't be duplicated. Its high clearance design is perfect for aggressive rock crawling, and allows you to conquer any obstacle in the way. The removable winch plate perfectly aligns with most full size winches including up to a Warn 12s EVO (pictured in the gallery) so you can make quick work of any recovery job on the trail.

The bull bar protects against light brush and can mount up to a 15-inch light bar above or below the bar if not running a winch. A 20-inch light bar can be mounted behind the satin black mesh plate in the middle of the bumper. A pair of up to 4-inch round lights can be mounted on the top plate of the bumper for even more lighting options. Pictured in the gallery are amber Baja Designs LP4 round lights. Installation is a direct fit, bolt-on process that we detail in our step-by-step install guide. Equipped with everything you need to take your off-roading game to the next level and built with style in mind, upgrade today with the Spec Series Jeep Winch Front Bumper.

• High Clearance Design For Aggressive Rock Crawling
• Welded-in Zip Tie Tabs For Clean Wire Management
• Accepts Multiple Size Winches
• Included Bull Bar For Protection Against Light Debris/ Brush
• Micro-Texture Black Powder Coat
• Satin Black Mesh Accent Plate
• Works Flawlessly with our SPJL-02 skid plate
• Accepts (1) 20" Light Bar, (1) up to 15" Light Bar, and (2) Round Lights (No bigger than LP4 or Rigid 360)

SKU FBJL-04

This new and improved stubby Jeep front bumper was designed to fit the Wrangler JK & JL, as well as the Gladiator JT. One of its key features are the pocketed clevis mounts that fit 3/4" D-rings, keeping them virtually flush with the front of the bumper except when in use. Between those mounts are fog light holes that can mount OEM 4-hole mounted fog lights, or our aftermarket LED Fog Lights. The Bull Bar includes adjustable light tabs to install lighting above or below the bar. Round lights or pods can be installed on these tabs, or you can mount our Elite 13-inch Light Bar when utilizing our Elite Light Rail Mounts.

This bumper includes an optional bolt-on winch plate, and if you're not running a winch, it can be left off of the bumper for a streamlined look. On the bottom edge at the front face of this bumper are three M12 nut mounting points that can be used for additional lights, GoPro mounts, & other accessories. Like all of our Jeep bumpers, this has a simple bolt-on installation with no modification required.

• Optional Included Winch Plate
• Accommodates Factory 4-Hole Mounted Fog Lights
• Can Mount up to a 13" Light Bar Above or Below Bull Bar
• Pocketed Clevis Mounts for 3/4" D-Rings
• Bolt-On Installation - No Cutting Required
• (3) M12 Nuts for Accessories Such As GoPro Mounts or Pod Lights
• Note: Not compatible with the Factory Skid Plate

SKU FBJL-10

The DV8 Offroad FBJL-10 front bumper was designed specifically for the Jeep JL and Gladiator. This is DV8's most modular bumper and comes with the full length wings and a stubby center section. It can also accommodate a 12,000 lbs winch and comes with a winch delete plate. Even the bull bar is modular, and to top it all off it accommodates fog lights.

• Accepts factory or aftermarket fog lights
• Modular design
• Comes with all variations
• Accommodates a 12,000 lbs winch
• Stainless steel button head hardware
• Functional design

*Please Note: The DV8 Pocket Fairlead will not fit on this bumper.
*Not compatible with factory skid plate. Requires custom brackets to be able to run a skid plate.

SKU FBJL-11

Engineered for the Wrangler JK & JL, as well as the Gladiator JT, this stubby Jeep winch bumper boasts a combination of off-road functionality and striking aesthetics. It was designed to maintain optimal clearance, to enable you to navigate the most challenging terrains. Equipped with a recessed winch tray tucked behind a tubular bull bar, many different size winches can be mounted for recovery options. 1-inch thick D-ring mounts that take 3/4-inch shackle pins provide additional recovery options.

Engineered to accommodate DV8 Elite 20" Dual Row, Baja Designs 20" Single Row, or Rigid 20" Single Row light bars, the inset light mount offers you lighting options on the trail. Your Jeep's OEM sensors are integrated in our bumper design, and retain their functionality. The bumper and protective bull bar are finished in a micro-texture black powder coat. The FS-1 Series bumper features a fully bolt-on installation.

Please Note: These bumpers not compatible with traditional roller style fairleads.

• High Clearance Stubby Winch Bumper
• Tubular Bull Bar
• Retains OEM Sensors
• Accepts Multiple Size Winches
• 20" Dual Row Light Bar Mount
• 1" Thick D-Ring Mounts for 3/4" Pin Shackles
• Recessed winch Tray and Removable Fairlead Mount
• Micro-Texture Black Powder Coat
• Bolt-On Installation
• The 20" light bar mount will only work with the following:
• Baja Designs 20"
• Rigid 20"
• DV8 Elite 20" Dual Row

SKU FBJL-12

Our MTO Series Wrangler & Gladiator Winch Front Bumper features a full-width design for maximum protection on the trail. Its aggressive design and flared wings look great with the JK factory fenders and the JL/JT Rubicon and Non-Rubicon fenders. The recessed winch tray accepts multiple size winches, and sits protected behind a tubular bull bar. Additional recovery options are provided by the 1-inch D-ring mounts that take 3/4-inch shackle pins. Sitting behind paintable aluminum accent panels is a mount that can take a DV8 Elite 20" single row light bar, Baja Designs S8 20", or Rigid SR 20" LED light bars. On each wing of the bumper is a mount for a 3-inch light pod. The bumper is finished in a micro-texture black powder coat, and features a fully bolt-on installation. The MTO Series front bumper is the perfect balance of durability, style, and utility.

* Please Note: These bumpers not compatible with traditional roller style fairleads.

• Full Width Design for Maximum Protection
• Accepts Multiple Size Winches
• Paintable Aluminum Accent Panels
• Designed to Work Well with all JK/JL/JT Factory Fenders
• 20" Single Row Light Bar Options
• Mounts for (2) 3" Pod Lights
• 1" D-Ring Mounts for 3/4" Shackle Pins
• Micro-Texture Black Powder Coat
• Works Flawlessly with our SPJL-02 Skid Plate
• Fully Bolt-On Installation

SKU RBGL-12

Our MTO Series Gladiator Rear Bumper maximizes ground clearance and departure angles, making it an ideal solution for aggressive rock crawling. This bumper extends only 2.5-inches from the rear of the Gladiator (not including d-ring mounts). Its slim profile was designed to minimize the risk of dragging the rear end over obstacles on the trail.

We've included various features that any rock crawler could use. Since removal of the factory hitch is required, which also increases ground clearance; we offer a replacement accessory hitch that sits within the bumper behind the license plate. An included flip-up license plate mount allows access to the hitch when needed. The factory license plate lights are utilized with this plate mount. The MTO accepts (2) 3-inch light pods to provide additional rear lighting on dark or dusty trails. 1-inch thick mounts that take 3/4-inch D-ring shackles provide recovery options.

Additional features include a high clearance trailer wiring mount for equipped models. The OEM backup sensors retain full functionality due to strategically placed sensor cutouts. A micro-texture black powder coat protects the bumper from the elements, and paintable aluminum mesh accent panels can be color matched to your rig. No drilling is required, as this features a fully bolt-on installation.

* Please Note: This is not compatible with the factory hitch. We offer a Replacement Accessory Hitch that integrates into the bumper's design to maximize ground clearance.

** Please Note: This is not compatible with the factory spare tire carrier. We offer a Stand Up Spare Tire Carrier that works as an excellent alternative.

• Ultra High Clearance Design for Aggressive Rock Crawling
• Bumper Extends Only 2.5" From Rear of the Truck (Not Including D-Ring Mounts)
• Mounts for (2) 3" Light Pods
• Welded Zip Tie Tabs for Clean Wire Management
• 1" Thick Mounts for 3/4" D-Rings (?" Shackle Pins)
• License Plate Flip-Up Kit Included to Access Accessory Hitch (Sold Separately)
• Utilizes Factory License Plate Lights
• High Clearance Trailer Wiring Mount
• Compatible with Factory Back-Up Sensors
• Micro-Texture Black Powder Coat
• Paintable Aluminum Accent Panels
• Bolt-On Installation

SKU RBGL-11

Our FS-15 Series Gladiator Rear Bumper was designed for off-road capability and aggressive rock crawling. The bumper has an extreme low-profile for maximum clearance and departure angles. It retains OEM features such as the factory hitch, trailer harness & connector, and license plate lights. It also has carefully located cutouts for the factory parking sensors, which we recommend installing with our Mopar Sensor Bezels. Welding zip tie tabs behind the bumper provide options for clean wire management.

The FS-15 Series Jeep JT Rear Bumper provides recovery options with 1-inch thick mounts for 3/4-inch D-ring shackles with ?-inch pins. Finished in a micro-texture black powder coat, this Gladiator bumper not only looks great, but is protected against the elements. Installation is a straightforward bolt-on process requiring 2 people.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• High Clearance Design for Aggressive Rock Crawling
• 1" Thick Mounts for 3/4" D-Ring Shackles with ?" Pins
• Compatible with Factory Hitch
• Mount for OEM Trailer Wiring Harness & Connector
• Retains Parking Sensors
• Retains OEM License Plate Lights
• Welded-in Zip Tie Tabs for Clean Wire Management
• Micro-Texture Black Powder Coat
• Fully Bolt-On Installation

SKU RBGL-06

The FS-7 Series Jeep Gladiator Rear Bumper brings your rig both rugged durability and clean functionality. Engineered to tackle the toughest terrains, this rear bumper boasts a high clearance design, ensuring your departure angle isn't compromised. This bumper's well-designed step offers easy cargo access to your truck bed for loading and unloading your gear. It effortlessly accommodates your factory hitch, license plate light, and trailer harness connector, ensuring that you maintain full functionality without any modifications.

Equipped with two mounts for 3-inch light pods, this rear bumper gives you the flexibility to enhance your rear lighting with ease. Illuminate the trails behind you and stay confident, even during low-light off-road excursions. Welded-in zip tie tabs offer practical solutions to keep your wires organized and neat. Crafted to withstand the elements, this rear bumper is finished with a micro-texture black powder coat. Not only does it provide a sleek and stylish look, but it also protects the bumper from rust, scratches, and wear. The FS-7 Series is fully bolt-on, with no modifications necessary for install.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• High Clearance Design with Functional Step
• Compatible with Factory Hitch
• D-Ring Mounts for D-Rings with 3/4" Shackle Pins
• Aluminum Accent Panels (Paintable)
• Zip Tie Tabs for Wire Management
• Compatible with OEM Plate Lights & Trailer Harness Connector
• Micro-Texture Black Powder Coat
• Fully Bolt-On

SKU RBGL-09

Developed with extreme terrain in mind, the Spec Series Rear Bumper for the Jeep Gladiator is designed for maximum function and protection in a stylish package. Its high clearance design allows for aggressive rock crawling, ensuring your vehicle can take on whatever the trail throws its way. Featuring two 3-inch light pod mounts on either end of the bumper behind aluminum accent panels, as well as welded zip-tie tabs inside for clean wire management; this bumper ensures that you won't be left in the dark out on the trails. With two clevis mounts capable of running 3/4-inch D-ring shackles, you'll have recovery options if needed.

Crafted from steel finished in a rust resistant black powder coat and accented with satin black aluminum panels, this bumper was built to look just as good as it performs. Compatible with the factory hitch and featuring a high clearance trailer wiring mount, this Gladiator rear bumper has everything you need to ensure your experience on the trail is amazing.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• High Clearance Design For Aggressive Rock Crawling
• Welded-in Zip Tie Tabs For Clean Wire Management
• Accepts (2) up to 3" Pod Lights
• Compatible With Factory Hitch
• Compatible With Factory Sensors
• Clevis Mounts for 3/4" D-Ring Shackles
• Micro Texture Black Powder Coat
• Satin Black Aluminum Accent Panels
• High Clearance Trailer Wiring Mount

SKU RBGL-12H

The MTO Series Gladiator Accessory Hitch was designed exclusively for use with our MTO Series Gladiator Rear Bumper. The hitch is hidden within the bumper, and is accessible behind the MTO bumper's included flip-up license plate mount. Applications include bike racks, cargo trays, and other accessories. It is finished in a micro-texture black powder and bolts directly to the frame.

* Please Note: This accessory hitch is only compatible with the MTO Series Gladiator Rear Bumper RBGL-12.

** Please Note: The spare tire will need to be relocated from the factory location. We offer a Stand Up Spare Tire Carrier that works as an excellent alternative.

• Compatible only with our RBGL-12 Gladiator Rear Bumper
• 2" Accessory Hitch Provides Options for Bike Racks, Cargo Trays, etc.
• Positioned Within the MTO Rear Bumper Providing Amazing Clearance
• Potential Additional Recovery Point
• Mounted Directly to the Frame
• Micro-Texture Black Powder Coat
• Fully Bolt-On Installation

SKU RBJL-13

This Made To Overland Series Jeep Wrangler Rear Bumper was designed for heavy off-road use, and is compatible with our Jeep JL Bumper Mounted MTO Tire Carrier. The bumper features a full-width design with tapered wings that look great with both factory & aftermarket fender flares. The OEM spare tire mount can fit up to a 37-inch spare tire above the bumper center step. The MTO retains use of the factory hitch & harness, and features sensor cutouts to retain full functionality of parking sensors.

Two 3-inch light pods can be mounted behind the perforated aluminum accent panels for supplemental rear lighting. These could be wired to a separate switch or to your reverse lights. The bumper also has (2) 1-inch thick clevis mounts compatible with 3/4-inch D-ring shackles to provide recovery options. A license plate bracket with an included light relocates your license plate away from the spare tire area to keep it visible when running a spare. On the interior of the bumper are welded zip-tie tabs for clean wire management. Our MTO Jeep Bumper has a fully bolt-on installation with no modifications required.

• Full Width Design Matching Factory & Aftermarket Fenders
• Compatible with our Jeep JL Bumper Mounted MTO Tire Carrier (TCJL-13)
• Compatible with Factory Hitch & Harness
• Mounts for (2) 3" Light Pods Behind Perforated Aluminum Panels
• 1" Thick Mounts for 3/4" D-Rings (?" Shackle Pins)
• Retains Full Functionality of Parking Sensors (If Equipped)
• OEM Mount Can Fit up to a 37" Spare Tire
• Includes License Plate Relocation Bracket and License Plate Light
• Minor Wiring Required for License Plate Light
• Welded-in Zip Tie Tabs for Clean Wire Management
• Micro-Texture Black Powder Coat Finish
• Bolt-On Installation

SKU RBJL-09

Step your off-road game up with the new Spec Series line of bumpers from DV8 Offroad. This Jeep JL Rear Bumper has everything you need for accessing tough terrain - with a stylish, dynamic look and top-of-the-line protection. Engineered for aggressive rock crawling, this high clearance rear bumper offers extreme protection from obstacles and other hazards off the beaten path. Its ultra-low profile means great ground clearance so you can navigate rocks, roots, and other rough terrains like nothing else. Got stuck? With two clevis mounts that take 3/4" D-ring shackles, you have excellent recovery options to get you back on the trail. Towards either end of the bumper are mounting points for a 3-inch light pod for supplemental trail lighting.

Complete with a direct fit bolt-on installation that retains the factory hitch & back up sensor functionality, the Spec Series Rear Bumper is an excellent choice when it comes to choosing the perfect bumper for your Jeep. Transform your off road experience with this upgrade today!

*Please Note: Not recommended for those with a factory spare wheel with no aftermarket carrier. A minimum 4.5" backspacing is recommended.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• High Clearance Design For Aggressive Rock Crawling
• Accepts (2) 3" Pod Lights For Supplemental Lighting
• Clevis Mounts for 3/4" D-Ring Shackles
• Welded-in Zip Tie Tabs For Clean Wire Management
• Includes License Plate Relocation Bracket & Plate Light
• Retains Back-Up Sensor Functionality
• Micro-Texture Black Powder Coat Finish
• Satin Black Accent Panel
• Direct Fit Bolt-On Installation

SKU RBJL-12

Our FS-7 Series Jeep JL Rear Bumper features a sleek, mid-width design. The FS-7 can fit up to a 37-inch spare tire above the bumper using the factory carrier. The bumper includes a license plate bracket with a license plate light to relocate the plate over to the side away from your spare tire. A pair of 1-inch thick reinforced mounts for D-ring shackles provide recovery options. Rear lighting options include (2) 3-inch pod light mounts that sit in a shielded position behind perforated aluminum accent panels. Welded zip tie tabs are strategically located for clean wire management.

This Jeep rear bumper is compatible with the factory hitch & harness, and has sensor cutouts to retain full functionality of the parking sensors. If your Wrangler does not have the rear sensors, we include plugs to cover the mounting points. Finished in a micro-texture black powder coat, this bumper is fully bolt-on. This rear bumper pairs great with any of our Wrangler JL Front Bumpers.

Please Note: **Will not work with OEM wheel due to wheel offset

• Sleek Mid-Width Design
• Fits up to 37" Spare Tire Above Bumper Using Factory Carrier
• Includes License Plate Relocation Bracket and License Plate Light
• Compatible with Factory Hitch
• Compatible with Rear Bumper Sensors (DV8 Sensor Bezels Recommended)
• 1" Thick Mounts for 3/4" D-Rings with ?" Shackles
• (2) 3" Light Pod Mounts Behind Perforated Aluminum Accent Panels
• Welded Zip Tie Tabs for Clean Wire Management
• Micro-Texture Black Powder Coat
• Bolt-On Installation

SKU RBJL-11

Our FS-15 Series Wrangler JL Rear Bumper features an extreme, low profile design suited for aggressive rock crawling. The bumper includes a license plate relocation bracket with a license plate light to make room for up to 37-inch spare tires above the bumper. The factory hitch and harness fit perfectly in an accessible position beneath the FS-15. For models equipped with factory sensors, we included sensor cutouts to retain full functionality of the feature. For models without factory sensors, we include sensor hole plugs for a clean look.

Toward each side of this rugged, Jeep bumper are 1-inch thick mounts that take 3/4-inch D-Rings with ?-inch shackle pins. These can be used as anchor points for recovery situations if you or your trail buddy get stuck on an obstacle. The inside of the bumper includes welded zip-tie tabs for clean wire management of the license plate light or other optional accessories. Finished in a micro-texture black powder coat, this bumper features a fully bolt-on installation.

• High Clearance Design For Aggressive Rock Crawling
• Retains Factory Rear Bumper Sensors (Recommend Using our Sensor Bezels)
• Compatible with Factory Hitch
• License Plate Relocation Bracket with Plate Light
• 1" Thick Mounts for D-Ring with ?" Shackle Pins (Not Included)
• Welded-in Zip Tie Tabs For Clean Wire Management
• Micro-Texture Black Powder Coat
• Direct Fit Bolt-On Installation

SKU RBJK-13

Our Made to Overland Wrangler JK Rear Bumper was designed for both the rock crawler and the overlander. This full-width Jeep bumper fits up to a 37-inch spare tire with a max of 4.5-inches of backspacing on the factory carrier. Alternatively, the optional MTO Tire Carrier swing gate provides additional utility for your spare tire management by being able to swing free of the tailgate.

Rear lighting options include (2) mounts for 3-inch light pods that are set behind perforated aluminum accent panels. These raw aluminum panels are prepped to be painted, and could be paint matched to the body or other accessories. 1-inch thick D-ring mounts that take ?-inch shackle pins provide recovery options at the rear of your rig. Finished in a micro-texture black powder coat, this bumper features a fully bolt-on installation.

• Jeep Full-Width Rear Bumper
• Mounts for (2) 3" Light Pods
• 1" Thick D-Ring Mounts
• Optional Tire Carrier Add-On (TCJK-13)
• Compatible with Factory Hitch
• Fits up to 37" Spare Tire (Max 4.5" Backspacing Wheels)
• Welded Zip-Tie Tabs for Clean Wire Management
• Micro-Texture Black Powder Coat
• Paintable Aluminum Accent Panels
• Fully Bolt-On Installation

SKU RBJK-12

DV8's FS-7 Series Wrangler JK Rear Bumper features a mid-width design that can accommodate up to a 37-inch spare tire on the factory mount. Supplemental rear lighting options are provided by (2) mounts that sit behind aluminum accent panels for 3-inch light pods. Welded zip-tie tabs allow for clean wire management. Recovery options are provided by 1-inch thick D-ring mounts that take ?-inch shackle pins. The FS-7 is compatible with the factory hitch and license plate bracket.

This Jeep JK bumper was designed for heavy trail use, utility, and clearance. Finished in a micro-texture black powder coat, its style compliments factory body lines.

• Jeep Mid-Width Rear Bumper
• Mounts for (2) 3" Light Pods
• 1" Thick D-Ring Mounts
• Compatible with Factory Hitch
• Fits up to 37" Spare Tire (Max 4.5" Backspacing Wheels)
• Welded Zip-Tie Tabs for Clean Wire Management
• Micro-Texture Black Powder Coat
• Paintable Aluminum Accent Panels
• Fully Bolt-On Installation

SKU RBSTTB-10

DV8's RS-10 Jeep Wrangler JK Rear Stubby Bumper was made with 3/16-inch and 1/4-inch cold rolled steel and .120 wall tubing. It's high degree angles and raised corners were trail-tested for clearance and protection. This has been powder coated in texture black, and includes solid D-ring mounts w/ rings. Easy installation, no modifications needed, and hardware is included.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• Optional Tire Carrier (Available Separately)
• Easy Bolt On Install
• LED Flush Mount Back Up Lights
• Solid D-ring mounts w/ rings included
• Class 3 hitch

SKU RBSTTB-14

This Jeep Wrangler JK Rear Bumper was made with 3/16-inch and 1/4-inch cold rolled steel and .120 wall tubing. High degree angles and raised corners, it offers superior clearance on the trail. This was finished in a black textured powder coat. This bumper was designed to accommodate up to a 35-inch spare tire with the stock tire carrier. Easy installation, no modifications needed, and hardware is included.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• Small holes can be used for either a jacking point or to mount an LED light.
• DV8 laser cut logo in center of the bumper
• Can accommodate up to a 35" tire with the stock tire carrier
• Easy installation

SKU RBSTTB-04

This DV8 Offroad Jeep Wrangler JK Rear Bumper is a trail-tested and proven design! This stubby rear bumper includes 2 recovery points with D-ring shackles included. A class 3 hitch is incorporated into the bumper. It's been finished with DV8's signature textured black powder coat.

Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.

• 3/16" and 1/4" cold rolled steel
• .120 wall tubing
• High degree angles and raised corners
• Solid D-ring mounts w/ rings included
• Textured black powder coating
• Class 3 hitch
• Easy installation, no modifications needed
• Hardware included